forming pressure

The control object is the optimum forming temperature and it is realized by controlling forming pressure.

优化目标为最佳成形温度,而温度的控制主要通过压力控制来实现.

Pressure control System and Sealing Ways for Expansion forming of Tee Tube

三通胀形压力控制及密封方法

The three dimension temperature distribution along mid-plane during hot pressing, the effect of moisture content and target density of mat on the distribution, the flow vapor pressure and the effect on the forming mechanism on density.

热压过程中板坯中平面温度场的分布。主要研究了不同条件下刨花板坯整个热压过程中中平面温度场的实时分布情况，水蒸气的流向以及成板密度形成机理的影响。

The significant of influence to each performance of compact is in sequence of forming temperature forming pressure holding time.

方差分析结果表明，对压坯各性能影响的显著性大小排序为：成形温度成形压力保温时间。

The optimal process variables obtained for forming valve bodies and the successful formation of large size high pressure cut off valve bodies using a 10 000 kN screw press.

最终在10000kN螺旋压力机上成功地锻造出大型高压截止阀阀体。

Engineering Calculation of Forming Pressure on Cross Wedge Rolling for the Blank of Slip Joint Pliers

鲤鱼钳毛坯楔横轧成形压力的工程计算

The influence of powder size and forming pressure are discussed for the performance of W-Cu composites.

着重研究了粉末粒度与成型压力对钨铜材料烧结致密度的影响.

The relationships between thermo physical properties and porosity, forming pressure and space-holder addition were investigated.

总结得到了热物性参数与孔隙率以及制备这些毛细芯所使用的成型压力和造孔剂添加量之间的关系.

Influence on Behaviour of Alumina Ball by Using Different Forming Pressure

成型压力对氧化铝瓷球性能的影响

The ore-forming pressure was small , ranging from 5 to 30 MPa.

热液压力不大,变化在5—30MPa之间.

An aluminium wave guide casting technology which employeda soluble plaster core and pressure-regulating forming was studied.

本文采用可溶性石膏型芯,研究调压成形条件下,铝合金波导的铸造成形技术.